Detailed setup of the ARC-53M is done in Edit mode. The following tables explain configurations available in Edit mode and how to set them.
To keep this manual simple and easy to understand, some descriptions for setup procedures are simplified. To enter Edit mode, hold down
the
MODE (EDIT/EXIT)
switch for three seconds. When the display shows “MN”, select a menu item assigned to the corresponding
PS/L
switch.
The following terms are used in the explanations for setup procedures.
• ENTER:
Press the
ENTER
switch located on the control panel to confirm your selection.
• Set:
Press the
INC/+
or
DEC/–
switch on the control panel until the desired value or item is shown in the display.
• Parameter:
Values or items that can be changed by users.
• Default:
Parameter settings configured before shipment from factory.
The following abbreviations are used to show labels on the display:
[FR]: FROM [YS]: YES [ER]: ERROR
PRESET (PS1/6/L1 footswitch)
Select Switch
Menu
How to Set
1
PRESET COPY [CP]
This item is used to copy the contents of a preset
to another preset.
[CP] on
ENTER
FR [PRESET NUMBER] flashes
Set
ENTER
TO [PRESET NUMBER] flashes
Set
ENTER
Parameter: [01–200] (default: 01)
2
BANK COPY [BC]
This item is used to copy the contents of a bank to
another bank.
[BC] on
ENTER
FR [BANK NUMBER] flashes
Set
ENTER
TO [BANK NUMBER] flashes
Set
ENTER
Parameter: [0–19] (default: 0)
3
PRESET DELETE [DL]
This item is used to delete the contents of the
specified preset.
[DL] on
ENTER
[PRESET NUMBER] flashes
Set
ENTER
Parameter: [01–200] (default: 01)
4
BANK DELETE [BD]
This item is used to delete the contents of the
specified bank.
[BD] on
ENTER
[BANK NUMBER] flashes
Set
ENTER
Parameter: [0–19] (default: 0)
EDIT MENU
Use the PS/L switches to select menus
Hold down the MODE switch to put the ARC-53M in Edit mode
Use the Select Switch to select the desired menu item.
Set each parameter value.
Press the MODE switch to return to Preset mode from Edit mode
