16
3) Connect the ARC-4’s
MIDI IN
plug to the MIDI interface’s MIDI OUT plug.
4) On the ARC-4 in Edit mode, select “
FIRMWARE UPDATE
.”
For details, please refer to “Updating Firmware via MIDI (FW-UD)” in ARC-4 Owner’s Manual (p.24).
5) Press the “
Send(F4)
” button in the lower left section of the SendSx’s main screen.
CAUTION!
During data transmission, never turn off the power to the ARC-4.
6) The Display-1 on the ARC-4 counts up from “
1
” to “
100
,” then shows “
-WR-
” and goes out.
7) Both the
PS
and
DIR
LEDs above the
MODE
switch illuminate, the
L1
–
L5
switches’ LEDs repeat blinking in turns, and the
PS1
–
PS5
LEDs
illuminate sequentially to show the writing process in progress.
8) When the
PS
and
DIR
LEDs above the
MODE
switch flashes alternately, then the writing is completed. If the unit does not reboot
automatically, disconnect the power once and then reboot it.
9) After rebooting, the Display-1 shows “
PARAM
” and “
ID ERR
” alternately. Press and hold the
MODE
switch. The Display-1 indicates
“
INIT
,” the data is forcibly initialized and the unit is restarted.