Terminal for connecting a
guitar, another instrument or
effects unit. Use the L
(MONO) terminal and R
terminal to connect a device
having stereo outputs.
Connect to the L (MONO)
terminal only when you are
using the AMBI SPACE in
monaural mode. Note that
the integrated HTS
circuit keeps the sound
texture the same
whether theeffect is
turned on or off.
Input (L (MONO)-IN-R) terminal
Input terminal for MIDI signals. This
terminal receives MIDI signals from an
external MIDI device.
MIDI IN terminal
This switch is used to select the input level
of the AMBI SPACE to match the output
level of the device to be connected to the
Input terminal. When connecting a device
with instrument level signals, set the switch
to the rear side (closer to the I/O jack). To
connect a device with line level signals, set
the switch to the front side.
Use a small flatblade screw driver to slide
the switch.
INPUT LEVEL SELECT switch
This switch is used to prohibit the original
(dry) sound from being output from the
Output terminal. When this switch is set to
the on position, the original (dry) sound will
not be output. To turn on the KILL DRY
switch, set it to the front side (closer to the
foot switch). Use a small flatblade screw
driver to slide the switch.
KILL DRY switch
This terminal is used to connect to an
external amplifier or mixer. To feed
monaural signals, connect to the L
(MONO) terminal.
Output (L (MONO)-OUT-R) terminal
For connecting an
AC adapter with 9V
DC center negative
polarity. Requires at
least 280mA of
available current.
Power DC 9V IN terminal
Rear panel
Side panel
Bottom panel
5
4
