©2009
23
RESET SWITCH RESETTING
If your treadmill looses power or will not start, check the reset switch located on the front of the motor cover.
If the white tab of the reset switch is not showing then the reset switch has not been tripped.
If the white tab of the reset switch is showing, the reset switch has tripped.
To reset the reset switch:
Remove the safety clip on console.
Press white tab of the reset switch in until it snaps back into place.
If the reset switch continues to trip - see treadbelt adjustment and treadbelt lubrication
SPEED SENSOR ADJUSTMENT
If the monitor does not display speed or distance the speed sensor and magnet may be misaligned.
Note: Always unplug your treadmill prior to cleaning in order to avoid electrical hazard or
shock.
Follow these steps to check and realign.
Remove the motor cover
Check the spacing and alignment between the magnet on the right side of the front roller and the speed sensor on
the frame. The spacing must be 1/8”.
Loosened screw and slide speed sensor in or out of clamp.
Retighten screw.
Replace motor cover
Содержание Free Spirit C 249 30860 0
Страница 29: ... 2009 28 ...