Free Cool ALWI-882, Руководство пользователя

Страница: 15 / 20

15
CUSTOMIZING SETTINGS
Electrolysis Intensity
Slower Flow = Higher pH Level.
Note: The conductivity of the water (measured in TDS) can affect the pH level.
Before setting Electrolysis Intensity, turn off tap (unit power should still be on).
Select the level you wish to adjust (i.e. “Alkaline 4, Alkaline 3, etc.) and hold the button for
5 seconds until the LED Display lights up.
Press the “RESET” and “CLEAN” buttons to adjust the electrolysis intensity.
Once the desired electrolysis intensity level is reached, press the same level button (i.e.
“Alkaline 4, Alkaline 3, etc.) once more to set the electrolysis intensity.
Using your pH Test Kit
Remove the test liquid from the container and place 2 small drops inside. Select your
card to check the accuracy of your setting.
Note: For better accuracy, allow 5-7 seconds of running water for your Ionizer to change its pH to the
desired setting before testing the water.
Filter Longevity
Before setting Filter longevity, turn off tap (unit power should still be on).
Press the “NEUTRAL” button and hold for 5 seconds until the LED Display lights up. Press the “NEUTRAL” button once
more to switch from Electrolysis Intensity setting to Filter Longevity setting.
The Filter Longevity icon is now shown on the LED Display.
Press the “NEUTRAL” button again after completion of setting to resume normal operation.
The water first travels from your tap through a Carbon filter where, the Electrolysis Intensity
Setting is designed to help you calibrate each level of pH on your Alkaline
ALWI-882 Water
Ionizer. Water quality can affect the output level of pH from your machine.
Use the pH test kit provided to ensure accurate pH output for each level. Use the Electrolysis
Intensity Setting to adjust if necessary.
Email : info@freecoolsystems.com
www.freecoolsystems.com
ALWI-882