Fredenstein Artistic EQ
Installation:
Please power down your rack or box first before inserting the Artistic Pre Plus. The power
requirements are not very demanding at a maximum of +/-70mA. The Artistic Pre Plus should work
in weaker racks as well.
User Controls:
High Frequency Control:
Select the desired corner frequency of the high frequency filter between 2000 Hz and 20 kHz.
High Frequency Gain:
Boost or cut the high frequency signal by 14 dB.
High Frequency Shelf or Bell:
Select the high frequency filter characteristics: Bell – Band Pass Filter, Shelf – High Pass Filter
Mid Frequency Control:
Select the desired corner frequency of the mid frequency filter between 300 Hz and 3000 Hz.
Mid Frequency Gain:
Boost or cut the mid frequency signal by 14 dB.
Color:
emulates tube amp characteristics, another significant way to alter the program material.
If activated, a sensible amount of tube-style amplification artifacts are added. These are level
sensitive like tube gear, higher levels increase the amount of artifacts.
In “norm” this circuit is completely disabled.
Low Frequency Control:
Select the desired corner frequency of the low frequency filter between 30 Hz and 300 Hz.
Low Frequency Gain:
Boost or cut the low frequency signal by 14 dB.
Low Frequency Shelf or Bell:
Select the low frequency filter characteristics: Bell – Band Pass Filter, Shelf – Low Pass Filter
EQ IN:
EQ activated when lit, otherwise it is hard bypassed. Allowing for immediate comparisons of the
eq'ed and original program.
Fredenstein Artistic EQ V1.0 JAN 4, 2019 Page 2
