Fredenstein Artistic Compressor
Rotary Controls:
INPUT
:
Sets the line level gain in the
range of -10 dB to +20 dB
RAT
:
Sets the compression ratio in the
range of 2:1 to 20:1
REL
:
Sets the release time of the
compressor from 70ms to 2.5s
OUTPUT
:
Make-up gain control in the
range of 0 dB to +20 dB
MIX
:
Output Mixer between the
compressed (wet) and
uncompressed (dry) signals
Switches:
SC Filter
:
Selects the low cut filter in the
side-chain.
lower position: off
middle position: 300Hz
upper position: 150Hz
LINK
:
Multi-channel synchronization
for two or more Artistic comp
modules. All channels will have
identical gain reduction to avoid
shifts in the balance
ATT
:
Compressor Attack Time
lower position: 0.5 ms
middle position: 25 ms
upper position: 5 ms
ON/BYP
: in upper ON position, the
compressor is active, in the lower
BYP (BYPASS) position or if the
rack is powered down, a relay
connects the output directly to
the input, the gain reduction
meter will still show the depth
of compression
Indicators:
CLIP LED
:
Lit when the output level reaches
+24dBu (2db before clipping)
GR (Gain Reduction) :
Shows actual gain reduction in
the range of 1db to 8db in one db
steps and 2dB for 8dB to 16dB
Fredenstein Artistic Compressor Manual V1.1 Aug. 27, 2015 Page 2
Содержание Artistic Compressor
Страница 1: ...Artistic Compressor Operating Manual...
