FDA300 Rev0306
9
Figure 4. Transformer
Install Voltage Transformer
The voltage transformers suppplied will work for 120 or 240 volt AC systems. The
transformers should be securely mounted inside the electrical box.
Each transformer will be connect to show line voltage phase and neutral or phase
to phase for star or delta windings of the generator. (Refer to Wiring section.)
Install Optional Hydraulic Oil Temperature Sensor
The hydraulic oil temperature sensor (FRC part number XE-FDT2) has 1/8-27
NPT male threads. (Refer to Wiring section.)
Install Optional Buzzer
Install the buzzer close to the control module so the audible warning is easily
associated with the visual warning on the display. The optional buzzer provided by
FRC requires a cutout hole of 1-1/8” (1.125”). (Refer to Wiring section.)
Voltage Transformer
Input:
120/240 VAC
Output:
12/24 VAC @ 0.2A
D = 1 1/2”
H = 1 3/8”
W = 2 3/8”
MW = 2”
Note:
Refer to Wiring section, Star or Delta Windings for
generator connections.
