background image

 

DANGER! 

 
Read before operation this machine! 
It is the owner’s responsibility to instruct all equipment operators and support personnel in the operation of winch. 

 
WARNING!

 

 
1) 

Do not attempt to operate this winch without 
proper training. 

 
2) 

Do not operate this machine until the owner’s 
manual has been completely read and 
understood.  
New owner’s manual are available from your 
Dealer or the factory phone + 45 98 63 21 22 
(North America: 514 654 6126). If the warning  
decals become illegible, new decals can also be  
ordered. 

 
3) 

Keep hands, feet and clothing away from power  

 

driven parts! 

 
4) 

Ensure that the cable is in good conditions before 
operating the winch. If the cable breaks, parts of it 
can fly both toward and away from the winch. 
Ensure that all bystanders are out of reach of the 
cable when the winch is used. 

 
5) 

Never handle cable without shutting of power-take 
off! 

 
6) 

Do not transport logs direct in the cable - use the 
log towing bar. 

 
7) 

This machine has been constructed to skid and 
push together timber that has been felled and is 
lying on the ground and may not be used for other 
purposes. The machine must not be used to pull 
vertical trees or trees that are wedged or jammed, 
as this is extremely dangerous. 

 
8) 

Check moving parts. They should be fastened in  
place, in good working condition and all shields 
and guards must be in place. 

 
9) 

Familiarize yourself with the controls and how to  

 

stop the winch and tractor in an emergency. 

 
10)  Do not let children or incapable persons operate 

the winch. 

 
11)  Do not wear loose clothing, loose sleeves, 

neckties or long uncovered hair around moving 
parts of machinery. 

 
12)  Park the winch and tractor on level ground for 

winching. 

 
13)  Operate the winch from a control rope at least 6 

m. to the side of the machine. 
Do not operate the winch from the tractor seat. 

 

 
 
 
 
 
 
 
14)  Ensure that other people do not become 

endangered when you are using the winch. 

 
15)  Do not leave the tractor running unattended. 
 
16)  Disengage the PTO an turn the tractor off before 

you service the winch. Remove the keys so the 
tractor cannot be started up accidentally. 

 
17)  Use only original Fransgård replacements parts, 

do not make any modifications. 

 
18)  Inform everyone who works with the winch about  

risks and how they can avoid accidents. 

 
19)  Stay alert! Do not operate when fatigued. 
 
20)  Do not winch at sideways angles exceeding 30  
 

degrees (see drawing). 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
21)  Failure to heed the warnings printed on the winch 
 

or in the owner’s manual might result serious 

 

injury or death. 

 
22)  The tractor should not be set in motion without the 
 

“butt ends” of the logs (that have been winched) 

 

being raised off the ground. If this is not done and 

 

an obstacle hits the butt end of the log (s), then 

 

the tractor may turn over and severe injuries may 

 

result.

 
 

 
 

 

 

 

 

Содержание V-4000













Отзывы: