- 2 -
SAFETY PRECAUTIONS
It is the owner’s responsibility to instruct all equipment
operators and support personal in the operation of the
machine. Do not operate this machine u
ntil the owner’s
manual has been completely read and understood.
New owner’s manual is available from your dealer or
the factory telephone: +45 98 632122.
All covers and screen must be correctly positioned and
checked before the machine is started. It is dangerous
to remain in the machine’s working area while its
working parts are rotating. Keep hands, feet and
clothing away from the power driven parts! Do not leave
the tractor running unattended.
Disengage the PTO and turn the tractor off before you
service the machine.
The machine is made to work in hay and straw crops,
and may not be used for anything else.
The machine may only be operated by qualified
operator.
Familiarise yourself with the controls and how to stop
the machine and tractor in an emergency.
Do not let children or incapable persons operate the
machine. Machine lubrication, adjustment and setting
may only take place while machine is not in use and
while the power take-off is switched off.
Remove the keys so the tractor cannot be started up
accidentally.
Retighten bolts and check adjustments after approx. 5
hours of operation.
Use only original Fransgård spare parts
.
Introduction:
Assemble instructions
The swath Wilter model SV-250-09SE is partly
assembled from the factory. All loose parts have to be
mounted according to the parts drawings later in the
spare part manual. Loose parts which is not mounted
is:
three point
hitch, 2 pieces stabilising chains, 2
pieces tines, 2 pieces wheels with brackets, support
legs, PTO-cover.
The gearbox is from Fransgård filled with 1,2 litre SAE
80/90 W oil and needs to be checked by the plug at the
back of the gearbox before starting to operate
(picture 1).
The machine is mounted with 4 pieces V-belts, which is
tightened from Fransgård, but need to be checked
before operation otherwise retighten (picture 2).
Mounting on the tractor
The swath Wilter SV-250-09SE is mounted on the
tractors
three point
hitch and the PTO is mounted after
this. It is very important to check the length of the PTO
in both working- and transport-position.
Picture 1
Picture 2