Fransgard DM-2850, Руководство пользователя

Страница: 4 / 8

2
SAFETY PRECAUTIONS
All screens must be correctly positioned and checked before
starting the machine. Take care for stone fling. It is not
advisable to remain in the working area of the machine while
working parts are rotating.
The machine is made to work in grass and straw crops, and
must not be used for anything else.
The machine must only be operated by qualified operator.
Machine lubrication, adjustment may only take place while the
machine is not in use and while the power take-off is switched
off.
In transport position with the cutter bar in vertical position the
safety chain must be mounted.
Tighten bolts and check settings after approx. 5 hours of use.
Blade bolts and disc bolts must be correct tightened.
If blades are changed, make sure they are proper mounted.
The machine must only be started when it is lowered.
The rpm of the PTO. must not exceed the recommended PTO.
speed.
The field must be cleared for foreign objects.
The main cover can be weared and has to be changed in time.
Only use original Fransgård spare parts.
Read instructions for use carefully before starting.
ASSEMBLE INSTRUCTION
Bolts, nuts and special pins etc. are mounted on the
machine where you need it.
pages.
Tilt the Carrying frame pos.38 page 4 and mount the three-point
hitch by means of the suspension fork pos.19. Mount the
carrying frame pos.12 page 14 on the gearbox and mount the
bracket pos.7. Mount the bracket and the canvas pos.1 and 19.
Mount the swath deflector pos.16 and 18. Mount the stabilizer
pos.31 and 32 on page 4 into the suspension fork pos.19
together with the unloading device pos.26, the lock pos.17 and
the spring pos.21. Mount the release bracket as follow, the
spring must face cutter bar and must be near the carrying
frame.
Adjust the spring under the unloading device as follow, the
transport lock must be unlocked and the suspension fork must
be to the right into the slide, then tighten the spring by means
of the eye bolt pos.22 just as much as the spring start tighten
up.
WORKING POSITION
Dismount the safety chain and release the transport lock (A).
Lover the cutter bar until there is about 20mm. in free of the
slide (B) see the illustration.
Adjust the tractor´s depth stop, if the tractor´s depth stop is in
bad condition, then use enclosed bracket, and tighten the
safety chain into the top bar bracket on the tractor, so the
machine can be kept in place.
The hydraulic cylinder must be floating.
Tilt the protection guard forward.
Adjust the cutting height by using the top bar.