Fransgard DM-2050, Руководство пользователя

Страница: 5 / 8

3
OVERLOAD RELEASE.
The overload release near the three point lift is a safety guard
which allow the cutterbar swing backward if it hit's into the ground,
when it happen then stop the PTO. and drive backward and the
overload release are going to lock again.
TRANSPORT POSITION
Change-over from working position to transport position is as
follows:
Lift the machine from the ground. Tilt the front swath guard
backwards and drag the canvas free of the brackets, so it not are
getting damaged.
Drag the cutterbar up into vertical position by means of the
hydraulic cylinder and lock it by means of the safety chaine.
Turn the transport lock (A) on, in the left side.