Franklin T9, Руководство пользователя

Страница: 9 / 21

8
The socket-outlet shall be installed near the equipment and shall be easily accessible.
La prise de courant doit être installée à proximité de l'équipement et doit être facilement accessible.
Turn Your Device On and Off
The instructions below explain how to turn your device on and off, or to restart your device if it cannot
be powered on and off using the
Power button ..
• Turn Your Device On
Press and hold the Power button until the device displays "Welcome".
• Turn Your Device Off
Press and hold the Power button until the device displays "Goodbye"
Your device will power off
Restart Your Device
If your device will not turn on or off using the Power button, remove and re-insert the battery (see the
section "
Insert the Battery "), then press and hold the power button again.
Note : Restarting your device does not reset the device settings.
Set Up Your Hotspot
● Insert the Battery
Remove the back cover using the thumb catch on the bottom edge of the hotspot.
Align the battery's contacts with those inside the battery compartment and gently press
down until the battery us seated.
Replace the back cover.
● Charge the Battery
Insert the small end of the USB cable into the micro-USB charging port on the right side of
the hotspot.
Plug the charging adapter into a standard AC power outlet.
● Get Ready
Make sure you are in an area covered by your service provider.
Make sure the device you are trying to connect to your Hotspot has its Wi-Fi (wireless
network connection) mode turned on.
Make sure you activated your Hotspot on your account with your service provider.