You can use a password to keep the information in the
Phone List private. The password is requested when the
unit is turned on and the Phone List is accessed.
Password Warnings
Warning! After you set the password, you must enter the
password to access the phone list for the first time during
a session. Always record your password and keep it in a
separate place.
If you forget the password, you must reset the unit to
access the phone list. Warning! Resetting the unit
erases all user-entered information. Always keep written
copies of your data.
If you do not have a reset button located on the back of
your unit, remove the batteries, wait at least two minutes,
and then re-install them. For battery instructions, see
“Installing the Batteries.”
If you have a reset button, use the sharp end of a
straightened paperclip to gently press the reset button.
If the unit does not reset after pressing the reset button,
follow the above instructions for removing the batteries.
Password Setup
1. Press ORG twice.
2. Use to
see
Set the password and press ENTER.
3. Type a password and then press ENTER.
Your password can have up to 20 characters.
4. To test the password, press ON/OFF twice, press
ORG, type the password, and press ENTER.
5. To disable the password, repeat Steps 1 and 2
above, and press ENTER when Enter password
appears.
15
Using a Password
