4
➤
Removing Cards
Warning:
When you remove a card
to install another, information that you
entered into the removed card will be
erased.
BOOKMAN model 440 uses two lithium
CR-2032 batteries. Here is how to in-
stall or replace them.
Warning:
When the batteries lose
power or are removed from BOOKMAN,
information that you entered in its built-
in book, and in an installed card, will be
erased.
1. Turn BOOKMAN over.
2. Slide off its battery cover in
the direction of the triangle.
3. Install the batteries following
the diagram in the case.
4. Replace the battery cover.
Warning:
Never install or remove a
card when BOOKMAN is on. If you do,
information that you entered in its built-
in book, and in an installed card, will be
erased.
1. Turn BOOKMAN off.
2. Turn BOOKMAN over.
3. Align the tabs on the card
with the notches in the slot.
4. Press the card down until it
snaps into place.
Installing Cards
Installing Batteries
➤
Resuming Where You Left Off
You can turn off BOOKMAN at any
screen. When you turn BOOKMAN
on again, the screen that you last
viewed appears.
