32
Sending Words
This BOOKMAN dictionary can send
words to and receive words from cer-
tain other BOOKMAN books.
To send a word, you must first install a
cartridge in your BOOKMAN, and that
cartridge must be able to send or re-
ceive words. To learn if a cartridge can
send or receive words, read its User’s
Guide.
1. Highlight a word in this book.
See “Highlighting Words” in this
User’s Guide.
2. Hold
✩
and press
KARTE
or
CARD
.
3. Highlight the other book.
4. Press
EINGABE
or
ENTER
.
The other book may automatically
enter your word. However, if your
word stops at the initial screen of
the receiving book, simply press
EINGABE
or
ENTER
to look it up.
Resetting BOOKMAN
If the BOOKMAN keyboard fails to re-
spond, or if its screen performs errati-
cally, first press
CLEAR
and then press
AN/AUS
or
ON/OFF
twice. If nothing happens,
follow the steps below to reset it.
Warning:
Pressing the reset button
with more than very light pressure may
permanently disable your BOOKMAN.
In addition, resetting BOOKMAN erases
settings and information entered into its
built-in book, and in an installed cartridge.
1. Hold
CLEAR
and press
AN/AUS
.
If nothing happens, try Step 2.
2. Use a paperclip to
gently
press
BOOKMAN’s reset button.
The reset button is recessed in a pin-
sized hole on the back of BOOK-
MAN. Look for it on the battery cover
or near the cartridge slot.
➤
Troubleshooting BOOKMAN
• Make sure your cartridge, if any,
is installed correctly.
• Check that the cartridge’s metal
contacts are dirt-and dust-free.
