If you do not have a reset button, or
if the unit does not reset after press-
ing the reset button, remove the
batteries, wait at least two minutes,
and then re-install them. For battery
instructions, see “Installing
Batteries” on page 38.
➤
Password Setup
1. Press
.
2. Press or to
see
Set
Password and press ENTRER.
3. Type a password and then press
ENTRER.
Your password can have up to 8
letters.
You are prompted to retype your
password.
4. Type your password again exact-
ly as you did the first time.
5. Press ENTRER to confirm and
enable your password.
To test the password, press
ON/OFF twice, press
, type
the password, and press
ENTRER.
To disable the password, repeat
Steps 1 and 2 above, and press
ENTRER when Enter New
Password is displayed.
59
Using a Password
Using a Password
