General Controls
Speaker
LED Light
Power On/Off
Volume Up
Volume Down
Optical Reader
Microphone
Stickers
Special stickers with pre-recorded
sounds which cannot be replaced
or deleted.
This product includes two types of stickers.
Stickers for your own recordings
which can be replaced or deleted
anytime as you want.
Tips on reading this user’s guide: This product uses sound prompts to assist
operations. For your familiarization of these sounds, touch the ear icons with your
reader while reading the instructions to hear sound prompt samples. We recommend
you read and “hear” through this user’s guide before making any recordings.
On/Off
Press . A sound prompt can
be heard before on or off.
LED light stays lit when the
device is turned on.
on
off
sound pr
ompt samples
Recording
Press and hold for 3 seconds to
hear a sound prompt and go to the
recording mode. LED light flashes.
1
2
Touch a sticker.
3
Press and hold for recording. As
countdown, four beep sounds can
be heard before recording starts.
LED light flashes quicker during
recording.
4
Release to stop recording. A
beep sound can be heard when
recording stops. LED light stays
flashing.
Note:
To ensure that your complete recording is
stored, please release the button one second
after you finish your recording.
Press and hold for 3 seconds to
hear a sound prompt and exit the
recording mode. LED light stays lit.
5
sound prompt
sample
sound prompt
sample
sound prompt
sample
Note:
For a sticker already with recording, the current recording
will be replaced with the new one. The pre-recorded sounds of
the provided special stickers cannot be replaced. An error sound
prompt can be heard instead. To hear a sample of the sound
prompt, see Step 3 under Deleting Recording.
sound prompt
sample
Playback
Touch a sticker. For a sticker
without recording, a sound
prompt can be heard instead.
IMPORTANT
DO NOT write on the stickers. Otherwise, recordings
may not play back.
sound prompt
sample
Deleting Recording
2
Touch a sticker with recording.
3
Press and hold and . Deletion starts when
LED light flashes quicker.
Press and hold for 3 seconds to hear a sound
prompt and go to the recording mode. LED
light flashes.
To hear a sample of the sound
prompt, see Step 1 under Recording.
1
Press and hold for 3 seconds to hear a sound
prompt and exit the recording mode. LED light
stays lit.
To hear a sample of the sound prompt,
see Step 5 under Recording.
5
4
A beep sound can be heard when
deletion is completed. Release
and . LED light stays flashing.
The reader allows around 60 hours of recording. New recordings cannot be made
when the memory of the device is full (You hear a beep sound immediately after
the four-beep countdown). Please delete unwanted recordings.
Note:
The pre-recorded sounds of the
provided special stickers cannot be replaced.
An error sound prompt can be heard instead.
sound prompt
sample
sound prompt
sample
Auto Power Off
1 min.
2 min.
4 min.
OFF
When the device is inactive:
= Sound prompt.
To hear samples of the sound prompts, touch the clocks
above with your reader.
2
3
1
6
5
4
7
All manuals and user guides at all-guides.com
