4
10.43"
[ 265 ]
7.00"
[
177.8
]
8.00"
[
203.2
]
5.72"
[
145.2
]
3.45"
[ 87.7 ]
ACCESS PANEL
ACCESS PANEL SCREWS
9.31"
[
236.4
]
2.92" [
74.1
]
6.65" [168.9
]
1.50"
[ 38.1 ]
INPUT
POWER
18.84"
[ 478.5 ]
17.32"
[ 439.9 ]
1-1/4" NPT
SUCTION
1-1/4" NPT
DISCHARGE
FIGURE 1:
TYPICAL INSTALLATION
The Inline System is designed to both increase a system’s incoming pressure, and to provide the system with constant
pressure across all outlets. See
FIGURE 2 for a graphical representation of what a typical installation may look like.
Ball
Valve
Check
Valve
Ball
Valve
Union
Coupling
Union
Coupling
To Home
Water Supply
Inline System
Pressure
Shut-off
Sensor
(optional)
2 Gallon
Tank
Check
Valve
Power
Ball
Valve
Pressure
Sensor
(Discharge into drain
rated for max pump
output at relief pressure)
Pressure
Relief
Valve
Pressure
Gauge
Flow
Optional Bypass
5 feet or Less
*Check
Valve
FIGURE 2:
*NOTICE: If system plumbing does not have a backflow prevention device, a check valve is required on the incoming
water supply line.
NOTE: These optional components are shown in a typical installation diagram. They should be used at the installer’s
discretion as required for particular applications.
