background image

OWNER’S MANUAL

4”  HIGH-HEAD FILTERED
EFFLUENT PUMP

BEFORE INSTALLING PUMP, BE SURE TO READ THIS OWNER’S 

MANUAL CAREFULLY.

                           

Fill the pump with water before starting or the 

pump will be damaged. The motor on this pump is guaranteed by 

the manufacturer, and in the event of failure it must be returned 

to an authorized service station for repairs. The motor warranty is 

void if repairs are not made by an authorized repair station.

INSPECT THE SHIPMENT

Examine the pump when it is received to be sure there has been no 

damage in shipping. Should any be evident, report it immediately 

to the dealer from whom the pump was purchased. Please check 

the pump package to see that it includes pump, motor, and motor 

leads (if your pump purchase includes a motor). 
Make certain that your available voltage corresponds to that of 

your motor.

C A U T I O N

READ AND FOLLOW SAFETY INSTRUCTIONS

This is the safety alert symbol.  When you see this symbol 

on your pump or in this manual, look for one of the 

following signal words and be alert to the potential for personal 

injury:

D A N G E R

warns about hazards that 

will

 cause serious 

personal injury, death, or major property damage if ignored.

W A R N I N G

 warns about hazards that 

can

 cause serious 

personal injury, death, or major property damage if ignored.

C A U T I O N

 warns about hazards that

 will

 or 

can

 cause minor 

personal injury or major property damage if ignored.

The label 

NOTICE

 indicates special instructions, which are 

important but not related to hazards.

Carefully read and follow all safety instructions in this manual 

and on pump.

Keep safety labels in good condition. 

Replace missing or damaged safety labels.

Wire motor for correct voltage.  

See Electrical Information section 

of this manual and motor nameplate.

Ground motor before connecting to 

power supply.

Meet National Electrical Code, 

Canadian Electrical Code, and 

local codes for all wiring.

Follow wiring instructions in this 

manual when connecting motor 

to power lines.

Hazardous voltage.
Can shock, burn, or
cause death.

Ground pump before
connecting to power
supply. Disconnect
power before working
on pump, motor 
or tank.

WA R N I N G

P. O. Box 12010

Oklahoma City, OK 73157-2010

405.947.2511 • Fax: 405.947.8720

www.LittleGiantPump.com

[email protected]

1

Содержание Little Giant 558223









Отзывы: