Form 106323101 rev 3, 07-2021
© Copyright 2021 Franklin Electric Co., Inc.
Страница 1: ...the bracket It is very important to keep the sealing surfaces as clean as possible Therefore avoid touching them and keep them clear from residue and debris 8 Apply P80 lubricant emulsion or an equivalent on the mechanical seal Pump Size Measurement X DA1A 1 243 0 031 DA1B 1 243 0 031 DB1 1 153 0 031 DB1 1 2 1 183 0 031 DB2 1 243 0 031 bellows and spring and install them on the motor shaft couplin...
Страница 2: ...l seal bellows and spring and install them on the motor shaft sleeve Again the sealing surfaces should be kept as clean as possible Therefore avoid touching them and keep them clear from residue and debris 9 For DC4 models only Lubricate the inside of the brack et hub wear ring with petroleum jelly or an equivalent 10 Place the square key into the shaft keyway and carefully slide the impeller over...
Страница 3: ... 1 2 K3A 7 1 2 213 JM 206 6 62 R173 FPDC1 1 2 K3 10 15 213 215 JM 202 7 31 8 38 R102 FPDB2 K1 1 1 2 3 56 C 177772 251 3 81 4 00 4 50 R113 FPDB2 K2 3 7 1 2 145 184 JM 222 4 50 5 12 5 81 R123 FPDB2 K3 7 1 2 10 213 215 JM 232 5 81 6 44 R193 FPDC2 K3A 15 215 JM 177766 213 7 25 R204 FPDC2 K4 20 254 JM 251 7 94 R215 FPDB3 K2 5 7 1 2 182 184 JM 177765 202 4 50 4 94 R225 FPDB3 K3 7 1 2 15 213 215 JM 204 4...
Страница 4: ...Form 106323101 rev 3 07 2021 Copyright 2021 Franklin Electric Co Inc ...
