2
INSTALLATION OF ICE-MAKING UNIT (FIM400)
Top View of Ice Bin
1)
Be sure the gasket is in place on the top surface of the bin as shown in Fig.3.
2)
Place the ice-making unit, Franklin Chef® model FIM400, on top of the bin and make sure it is
properly aligned with the sides and back edge.
3)
Turn the brackets at the back of the ice bin and align them with the holes in the bottom of the
ice-making unit (Fig. 4). Fasten the brackets in place with the screws supplied (Fig.5).
4)
Place the assembly in its final location. Make sure it is level by using a carpenter’s level and rotating
the adjustable feet on the legs. Apply sealant as necessary between ice maker and bin.
Fig. 4
Fig. 5
Gasket
Ice Maker
Brackets loose
Bin
Brackets
fastened
Drain hole
Adjustable foot
Fig. 3
Cut-out slot for deposit of ice
Back of unit
