Risk of personal injury
Risk of:
Q
damage to equipment
Q
errors while operating the device if the instructions are not complied with correctly
Q
other material damage
Additional notices
Reference to other sections and/or guidelines of the manufacturer
Disposal instructions
1 General
The profi-air condensate pump reliably discharges condensate from the profi-air 180 flat ventilation unit. It is required if a free
condensate drain at a gradient of at least 2 % cannot be guaranteed. The delivery includes all necessary parts to connect the
condensate pump to the ventilation unit.
1.1 Introduction
These installation and operating instructions are intended to help you install fully functional profi-air condensate pumps and
properly operate them. We recommend that you read these instructions carefully before you install and use the pump. These
installation and operating instructions can also serve as a reference for service and maintenance work and thus guarantee
smooth and efficient operation.
1.2 Safety
If used for the intended purpose, the device is safe and reliable to operate. The construction and design are state of the art
and comply with all relevant DIN / VDE regulations and safety provisions. All safety regulations, warnings and notices of these
installation and operating instructions have to be complied with; non-compliance might result in personal injury and/or damage
to the profi-air condensate pump.
1.2.2 Symbols used
1.2.1 Safety regulations
Q
Connection and putting into operation of the profi-air
condensate pump must be performed by authorised and
qualified personnel only.
Q
Installation of the profi-air condensate pump must be
carried out according to applicable local construction,
safety and installation regulations.
Q
Changes or modifications of the profi-air condensate pump
are not permitted.
Q
Keep these installation and operating instructions near the
device during the entire life of the profi-air condensate pump.
Installation / operating instructions – profi-air 180 flat condensate pump
4
