FRÄNKISCHE DATALIGHT Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 36

FRÄNKISCHE DATALIGHT Скачать руководство пользователя страница 22

4 Multicast Configuration

4.3 Multicast Router Port Settings

4.4 Unregistered Multicast Settings

If IGMP Snooping for a VLAN is configured in that way, that the Multicast Router Port learn is enabled, then the correct Multi-
cast Router Port should be already known. In case of a wrong detection, it may be necessary to declare this interface as static.

Figure 40: Multicast Router Port page

This configuration can be done in the menu

Multicast > Multicast Router Port.

This configuration can be done for each specific VLAN.

The network can be prevented from unregistered multicast. The standard configuration of the switch is,
to forward unregistered multicast to each port.

Figure 41: Unregistered Multicast page

Check the port, which should be configured and click on “Edit”.
In the Popup can be configured, if unregistered multicast should be forwarded or filtered.

Figure 42: Unregistered Multicast Popup

DATALIGHT Switch 12+4-Port 1000

22

«
...
20
21
22
23
24
...
»

Содержание DATALIGHT





































Отзывы:

Нет отзывов