manualshive.com logo in svg

Franke T 200, Руководство по эксплуатации

Поделиться
Скачать
Franke T 200 Скачать руководство пользователя страница 7

5 

11-03-2014 / LSC 044 / Rev. 00

2.  GENERAL ADvICE FOR THE INSTALLER

read carefully the instructions and warnings contained in this manual and in the “

INSTRUCTION MANUAL FOR THE INSTALLER”, 

since they provide important indications concerning the installation of the appliance.

Attention!

The electric system, water supply system, drainage system and gas system (in case the appliance is pre-fitted for gas), MUsT 
already be put in place by the customer in order to allow the proper installation of the machine. The installation engineer cannot 
change the existing system put in place by the customer. see chapter 2.2: “Installation requirements for the user”.

Attention!

The appliance must be installed where use and maintenance are restricted to trained staff.

Attention!

cArEfUlly rEAD THE folloWInG WArnInGs, WHIcH offEr IMporTAnT GUIDElInEs for THE sAfE UsE AnD 
MAInTEnAncE of THE ApplIAncE.

The appliance must only be used for its intended purpose and it must be installed in a suitable place for its use. Any other use is there-
fore considered as improper and unreasonable. 
The manufacturer cannot be held liable for any damage caused by improper, incorrect or unreasonable use. Installation must be carried 
out by qualified personnel according to current laws and to the manufacturer’s instructions. Incorrect installation may cause damage to 
people, animals or property for which the manufacturer cannot be held liable.

2.1  GENERAL WARNINGS

Содержание T 200

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды