background image

FOOD WASTE DISPOSER OWNER'S GUIDE

IMPORTANT - Read all instructions thoroughly. 

Keep this guide for future reference. 

CAUTION - Be sure to review SAFETY INSTRUCTIONS PERTAINING TO A RISK OF

FIRE, ELECTRICAL SHOCK OR INJURY TO PERSONS before installing disposer.

Our food waste disposer is a reliable appliance that will

offer your household many years of trouble free use.  This

disposer has been uniquely designed to free your kitchen of

all organic food waste left over after the preparation and

clean-up of meals.  Simply turn on the water, switch the

disposer on, put your food waste in the disposer and it will

shred the garbage into very fine particles that are easily

flushed through the sewer system without any problem.  For

Batch Feed Operations, please see Section 6 of this manual.

Before installing and operating this disposer:

1.  Make sure that the installation of this appliance is

allowed by the authorities.

2.  Please read and follow all recommendations in this

manual to ensure trouble free operations.

If you have any questions, please contact your 

retailer.

1

MOUNTING ASSEMBLY

2

ELECTRICAL CONNECTIONS

3

OVERFLOW/APPLIANCE CONNECTIONS

4

ATTACHING THE DISCHARGE ELBOW

5

CONNECTING DISPOSER TO MOUNT ASSEMBLY

6

OPERATING INSTRUCTIONS

7

TROUBLESHOOTING

8

CLEANING AND MAINTENANCE

9

ELECTRICAL INFORMATION

Table of contents

B E A B

B E A B

A p p r o v e d

A p p r o v e d

www.franke.co.uk

FR020627 OWNERS GUIDE  16/5/06  4:38 pm  Page 1

Содержание FOOD WASTE DISPOSER









Отзывы: