Franke FCI604B1, Инструкция по эксплуатации, Страница: 15 / 20

15
INSTALLATION INSTRUCTIONS
The installation comes under the exclusive responsibility of specialists.
The installer is held to respect the legislation and the standards enforce in his home country.
How to stick the gasket:
The gasket supplied with the hob avoids all infiltration of liquids in the cabinet.
His installation has to be done carefully, in conformity of the following drawing.
Fitting - installing:
•
The cut out sizes are:
•
Ensure that there is a distance of 50 mm between the hob and the wall or sides.
•
The hobs are classified as “Y” class for heat protection. Ideally the hob should be installed
with plenty of space on either side. There may be a wall at the rear and tall units or a wall
at one side.
On the other side, however, no unit or divider must stand higher than
the hob.
Cut size Cut size flush mounting Glass size
Ref. Width Depth Width Depth Radius Width Depth Thickness
FCI604B1 560 490 596 526 8 590 520 4
Stick the gasket (2) two millimeters
from the external edge of the glass,
after removing the protection sheet (3).