TECHNICAL DATA
• Flow rate –1.75 gpm at 60 psi
• Recommended water pressure – 30-85 psi
• Max water pressure – 115 psi
• Max water temperature – 158
o
F
• Hole size for faucet – 1
3
/
8
"
Note
Contact us immediately if you see inconsistencies:
• Phone: 1-800-626-5771
• Email: [email protected]
• Website: www.franke.us/ks.com
Contents in Box
A. Faucet assembly
B. Supply hoses
C. Allen wrench
D. Escutcheon
E. O-ring
F. Rubber and steel mounting washers
G. Mounting pins and nuts
INSTALLATION INSTRUCTIONS
1. Remove all contents from the package and check for
completeness.
2. Turn off water supply.
3. Remove faucet (1) and hardware from its protective packaging –
faucet comes assembled. Remove fixing hardware.
4. Cut mounting hole 1
3
/
8
" in diameter (35mm) in the desired
position (if one isn’t available).
5. Ensure rubber o-ring (2) is in the base of the faucet and install
faucet into mounting hole – DO NOT use putty or other sealant
at this location.
6. Install the mounting hardware to the mounting pins (3) in the
following order: Rubber mounting washer (4), steel mounting
washer (5), mounting nuts (6). Tighten mounting nuts (6) to
secure faucet.
7. Connect the supply hoses (7 & 8) to the water supply in the
home.
8. Remove the aerator by hand, turn on the water and flush the
faucet for any debris. Check for leaks, and reinstall the aerator.
D.
E.
F.
G.
C.
B.
A.
6.
5.
4.
3.
2.
1.
7.
8.
