9
This switch of red colour has located on the bottom of the machine and it is suitable to the interrupt the current in case
that the motor has come to a very high temperature (in case the machine has been left accidentally switched-on)
Wait for few minutes to keep the motor cooler, then push the button in the higher position in order to start-up the
disposer.
2.
VERIFY THE PRESENCE OF THE TENSION ON THE LINE
Check that to the shunt socket the presence of 220V current. Will be enough to insert in the socket another house
appliance having the same voltage and verify the running.
3.
VERIFY THE SWITCH
Check that the switch or the eventual remote control has not been damaged.
Verify the level of the battery of the remote control, and eventually replace it.
4.
VERIFY CABLE –PLUG – SOCKET
Check that the connection phase-neutral, switch, machine has been done correctly .
Warning: Turn off the power before to enter in such part.
5.
VERIFY PROBABLE GRIPPING
Check that foreign matters (example: spoon) or a big quantity of material has not gripped the grinding mechanism.
Position the switch located on the system in OFF position or removes the plug from the socket.
Insert the hexagonal key, supplied as outfit, inside the relevant position located centrally on the bottom of the device
(Fig. 1) and turn clockwise and counter clockwise in order to release the disposer.
Remove the exceeding material of the foreign matters using a proper tool (example: long beak pliers).
Wait few minutes in order to keep cooler the motor and push the Reset button (Fig. 2) in high position to start the
disposer.
PREVIOUS DOCUMENT
START
