background image

19

The electronic cooking programmer

This feature allows you to program the oven or the grill as follows:

• delayed start for a specific length of time;

• immediate start for a specific length of time;

• minute minder.

Button Functions:

 

: minute minder with hours and minutes

 

: cooking time

 

: end cooking time

 

: switch to manual mode

 

: set cooking time - backward;

 

: set cooking time - forward.

How to set the digital clock

After the appliance has been connected to the power supply, or when the power has gone out, the clock

display will automatically reset to 0:00 and begin to blink. 

0.00

• Press the   button and then set the correct time (within four seconds) using the    and   buttons.
Button   sets the time forward.
Button   sets the time backward.
Whenever the time needs to be reset, follow this same procedure:

Manual operation of the oven

Once the correct time has been set, the programmer automatically switches to manual mode.

Note:

 To reset the manual mode after each "Automatic" cooking, press the    and   buttons.

Delayed start with set cooking time

The cooking time as well as the time at which the cooking ends must be set. Let us suppose that the display

indicates 10:00 a.m. and that we wish to cook something for 30 minutes and we want cooking to end at

13:00.

1. Turn the oven control knob to the desired cooking mode and temperature (for example: convection mode

at 200°C).

2. Press the   button and then set the desired cooking time (within four seconds) using the   and 

buttons. Let us suppose that we set the cooking time to 30 minutes. The display will read as follows:

Release the button and after 4 seconds the correct time will reappear along with the   symbol and the

word “

AUTO

”.

3. Press the   button and then use the   and   buttons to desired end cooking time . Let us suppose

this time to be 13:00.

4. After the button has been released, the current time will be displayed after approximately 4 seconds:

The word “

AUTO

”  will light up reminding you that the cooking time and end cooking time have been

programmed in automatic mode. At this point, the oven will turn on automatically at 12:30 and then turn off

after 30 minutes. When the oven is turned on, the symbol of a hot pan   will be displayed for the entire

cooking time. At any time during the cooking process, the length of the cooking time can be displayed by
pressing button  , and the end cooking time by pressing button  .

The timer rings when cooking is complete; to turn it off, simply press any of the buttons except the 
and 

 

 buttons.

All manuals and user guides at all-guides.com

all-guides.com

Содержание AX 97 M
















Отзывы: