Franke 2000065995, Инструкция по установке и эксплуатации, Страница: 6 / 48

6
ZMI
_001_
2000
0659
95-A
Q
RM460
_#SE
N
_#AQ
U
_#V2
.f
m
11. Remove functional part
11.1 Remove the sealing cap (siehe Kapitel 10.1 ).
11.2 Close the flow volume regulator.
11.3 Remove the safety ring.
11.4 Remove the pressure cap and spring.
11.5 Use a socket spanner to unscrew the functional part.
11.6 Reassemble in the reverse order.
12. Fault correction
If you are unable to correct a fault or if the fault is not described in the fault correction
section, please inform the AQUA service department.
Fault Cause Remedy
Water does not flow at
all – Water supply interrupted
➯
Restore
– Flow volume regulator closed
➯
Open it
– Functional part faulty
➯
Replace it
Water flows conti-
nuously – Functional part/upper section faulty
➯
Replace it
Water flow too weak – Flow volume regulator not fully
opened
➯
Open it
– Supply pressure too low
➯
Check it
– Flush volume adjustment incorrect
➯
Adjust it
Water flow too large – Flush volume adjustment incorrect
➯
Adjust it