2.4. Mounting the cast iron legs and the
bottom heat shield
Remove the cast iron top from the stove (Fig.2),
unscrew the two bolts securing the stove to the pallet
and remove the stove from the pallet.
Tip the stove towards the rear and place it gently on the
floor on 2 timber battens.
Fix the legs and the shield using the bolts provided
(Fig. 3).
2.5. Fitting of the handle
In order to avoid the damaging of the threading, first put
the handle in operating position then screw it into the
taping of the lock (fig. 4).
2.6. Assembly of flue spigot and blanking
plates
The stove is supplied with a connection flue spigot with
an inner diameter of 153 mm.
Figure 2 - Removal of cast iron top
A
B
C
D
Figure 3 - Installation of legs and lower heat shield
Figure 4 - Fitting the handle
A : Stove base
B : Heat shield
C : Bolt
D : Leg
A : Baffle
Document n° 759-4 EN ~ 04/02/2000
Wood stove
Camargue
Ref. 134 10 09
Technical manual
5
