background image

3 - Technical Information 

 

 
This product has been designed to operate in accordance with the product specification. The 

FH560D 2500 watt searchlight has the following features: 
 

„

 

All marine grade materials and fixings;

 

„

 

Parabolic glass reflector;

 

„

 

Stove enamel painted;

 

„

 

Full 360° horizontal rotation;

 

„

 

Vertical movement ±40°;

 

„

 

Internal self regulating heater;

 

„

 

Instant lamp re-strike, no cooling down time required;

 

„

 

Economical 500 hour lamp life;

 

„

 

Toughened front glass;

 

„

 

Luminous flux 240000;

 

„

 

Colour temperature 6000K;

 

 
 

The searchlight also performs to the following optical data: 
 

„

 

Metal Halide light source; 

„

 

Lamp Wattage - 2500 Watts; 

„

 

Supply voltage - 220/240V; 

„

 

Peak Beam Candlepower – 141 million lux; 

„

 

Range – 11,870 metres; 

„

 

Divergence - 1.5°; 

„

 

Temperature range:  -50°C; 

 

In order that the searchlight operates correctly it is imperative that competent personnel are 
responsible for the installation, operation and servicing of this equipment. Failure to adhere to this 

advice may cause premature failure or incorrect operation of the searchlight, which may damage 
the equipment or cause personal injury. 

 

Technical information on the Irem Ignitor & PSU is included overleaf. For more detailed information 

please contact the manufacturer. 
 

Ignitor ref: 

AD3050B-US (Irem) 

PSU ref: 

BC2500E (Irem) 

 
 

 
 

 
 

Back To Top

Содержание A2899



















Отзывы: