Installation Guidelines
A typical installation and connection routine for the searchlights is as follows:
Referring to wiring diagram X4737, a 240v or 115v AC supply should be connected to the
Power Supply Unit as shown, which then provides a common feed to all other functions and
equipment.
Cables required to be connected by the customer: -
4 cores 4mm cable from the Searchlight into the PSU, doubling up the pairs.
4 cores 1.5mm cable from the Searchlight to the PSU.
Mains supply cable.
(Customer may need to provide a suitable junction box to extend these cables
–
3 metres
supplied). The searchlight head is pre-wired.
When the light is in operation the output from the PSU should be approximately 19v dc at
54amps.
