NT 1900 B – 02/2019 _______________________________________________________________5
2-
Unscrew the 3 screws in each lateral panel to be switched over. Then, remove the clips in the
upper section to separate the panels.
3-
Move the panels to the desired configuration, then attach the panels using the screws and
clips. Lastly, reattach the cover.
1
2
3
The filter holder rail is attached to the intake panel, which allows a filter to be used regardless of the
configuration required for the intake
5
ELECTRICAL CONNECTION
5.1
GENERAL INFORMATION
The electrics must be connected by a qualified electrician.
The electrical installation must be equipped with a circuit breaker.
The electrical connection of the MODULYS® Eco unit must be made via the padlockable proximity
switch provided.
The appliance must be connected via a rigid, insulated and temperature-resistant cable, with a
diameter corresponding to current standards and regulations.
5.2
MOTOR DIAGRAMS
Single-phase motor
Three-phase motor
