Models: Diablo Progressive X / Wolf Hoffmann Signature oder Custom Shop
The Floyd Rose vibrato is mounted together with a locking nut (see P. 7).
Bigsby B5 vibrato with Roller Bridge
10
Guitars that come with a Floyd Rose Vibrato System feature our specially designed locking nut. This nut
locks the strings and guarantees tuning stability even during extreme use of the Floyd Rose Vibrato Sys-
tem.
When stringing and / or tuning a guitar with a Floyd Rose Vibrato System keep the following steps in mind:
1. Cut off the string’s ball end and insert the string between the saddle and the string holder block of the
Floyd Rose Vibrato System and tighten the string stopper screw.
2. Feed the strings through the nut and under the loosened pressure pads.
3. Tune the guitar with the nut still unlocked. Keep in mind that the overall tuning with an unlocked nut
should be below the correct pitch. When the pressure pad screws are tightened the strings will tune up
slightly due to the additional pressure.
4. Once the guitar is tuned, tighten the screws on the locking nut pressure pads with the supplied Allen
wrench.
5. Fine tuning is done with the fine tuning screws of the Floyd Rose Vibrato.
Original Floyd Rose vibrato
Models: Panthera Legacy, ES P90/Humbucker oder Custom Shop
Manual_FR_CS_2015_E.indd 10
18.11.15 15:05