70001040-MD250, 71001040-MD350
72001040-MD550, 73001040-MD550
70002040-MD250, 71002040-MD350
72002040-MD550, 73002040-MD750
Water Garden
Lily Pad Falls
Customer Service: 1800-914-9835 |
© Frame It All. All Rights Reserved.
1 LEVEL KIT CONTAINS:
•
2 x Composite Timbers 4’ Curved
•
17 x Composite Timbers 2’ Straight
•
36 x Stacking Brackets
•
4 x 4-Way Bracing Brackets (1 Bag)
•
2 x Finishing Sleeves (1 Bag)
•
8 x Stacking Stakes (**See Note Below)
•
11 x Anchor/Ground Serrated Stakes
•
76 x Plugs/Locking Nubs
•
11 x Caps
•
2 x Rubber Liner (Pond/Waterfall)
•
2 x Underlayment (Pond/Waterfall)
•
1 x Water Pump
•
1 x Pump Tubing
ASSEMBLY INSTRUCTIONS
–
Building the Frame
STEP 1a:
Assemble the curved timbers by sliding one end of the timber into the channel end of one
of the brackets. Use plugs to lock the bracket in place.
Repeat this process on the other end of the timber flipping the bracket in the opposite
direction. Make sure that all your curved timbers have brackets connected in the same
way with relation to the curve.
(see example).
Repeat for all curved timbers.
How the Joints Work
Use plugs (included)
to cover the holes on
both side of timbers
STEP 1b.
For a 1 level pond design, connect a 2ft board with 2 x 4-way brackets as
shown
and 2
x 2ft boards with a 4-way bracket on one end and a normal bracket on the other end as
shown
. For 2 level, double these board amounts.
(See example).
Use plugs to
cover the holes
–
two plugs are
required per
bracket (1 on
each side)
Use a Cap to
complete the
top level.
Use anchor
stakes for
ground level
frames and
stacking stakes
for additional
levels.
Use stacking
stake when
creating a
multi-level
STEP 1c.
Connect all other 2ft boards with brackets with each side having a bracket oriented the
opposite way.
(See example).
Repeat for all remaining 2ft timbers.
IMPORTANT: READ ALL
INSTRUCTIONS BEFORE
STARTING YOUR BUILD!
Required Tools:
•
Shovel
•
Levelling tool
•
Hammer
Recommended Tools:
•
Pond Safe Foam
Sealant
•
Grading Rake
2 LEVEL KIT CONTAINS:
•
4 x Composite Timbers 4’ Curved
•
27 x Composite Timbers 2’ Straight
•
58 x Stacking Brackets
•
8 x 4-Way Bracing Brackets (2 Bags)
•
2 x Finishing Sleeve (1 Bag)
•
19 x Stacking Stakes (**See Note Below)
•
11 x Anchor/Ground Stakes
•
124 x Plugs/Locking Nubs
•
11 x Caps
•
2 x Rubber Liner (Pond/Waterfall)
•
2 x Underlayment (Pond/Waterfall)
•
1 x Water Pump
•
1 x Pump Tubing
**NOTE
Stacking stakes should only be used
when stacking boards for water
garden application.
ONLY
Stacking Stakes can stack!
