2
M.FDKA100-03 26/09/2017
M.FDKA100.1-03 26/09/2017
1. SAFETY WARNINGS
•
The FDK100 Series Dehumidifier must always be connected using the grounded electrical
connection as required from all electrical appliances. The warranty is voided and all
responsibility for the operation is born by the owner if non-grounded wiring is utilized.
•
The FDK100 Dehumidifiers must only be maintained and serviced by a qualified technician.
•
The FDK100 Dehumidifiers are intended only for operation when oriented with the unit sitting on
its feet and level. Any other orientation could cause water to come in contact with the electrical
components. Remove plug before moving dehumidifier. If any water may have spread
throughout unit, the unit should be opened and allowed to dry thoroughly before reconnected to
electric and restarting.
•
For proper operation, neither the inlet or discharge should be positioned against a wall. The
inlet requires a minimum of 12” clearance and the discharge needs a minimum of 24” clearance.
•
For proper diffusion of air throughout the room, the dehumidifier should be positioned with the
sides against a wall and the inlet and discharge perpendicular to the wall.
•
Do not insert any objects into the inlet or discharge. If service is required, call a qualified
technician. All work on unit should be down with the unit “off” and unplugged.
•
Do not use water to clean unit exterior. Only use a damp cloth with unit unplugged.
•
Do not use unit as shelf or device to hang clothes. This could cause damage to unit.
•
The inlet filter generally needs cleaned once per month. Check unit on a weekly basis to ensure
that more frequent cleaning is not required.
Identification:
For future reference, write down the model, serial number, date of purchase and use this information
whenever corresponding concerning your dehumidifier.
Model Number
______________________
Serial Number _____________________________
Date of Purchase
_____________________________
Warning
115 Volts AC may cause serious injury from electric shock.
1. Disconnect electrical power before servicing
2. Plug unit only into grounded electrical outlet
3. Do not use extension cord
4. Do not use plug adapter
Power Supply:
115V, 60 Hz
AC Only 1 Phase
Outlet Requirement:
3-Prong
Circuit Protector:
Only compressor thermal and overload relay protector
Circuit Breaker Fuse on PCB supply
