FRADAN PB-10 IC, Руководство оператора

Страница: 9 / 12

9
FUEL & OIL
PREPARING FOR OPERATIONS
WARNING
• Never fill the fuel tank to the very top.
• Never add fuel to the tank in a closed non-ventilated area.
• Do not add fuel to this unit close to an open fire or sparks.
• Be sure to wipe off spilled fuel before attempting to start engine.
•
Do not attempt to refuel a hot engine.
WARNING
All Fradan Blowers are shipped
WITHOUT OIL.
When filling oil, refer to
engine manufacturers’ Instruction Manual.
WARNING
The engine exhaust from this product contains chemicals
known to the State of California to cause
cancer, birth defects, or other reproductive harm.
When preparing fuel, use only the amount needed for the job you are to do. Do not use fuel that has been stored
longer than two months. Fuel stored longer than this will cause hard starting and poor performance. If fuel has been
stored longer than this time, it should be removed and filled with fresh fuel.
CHECK POINTS BEFORE OPERATION
1. Check for loose bolts, nuts and fittings.
2. Check the air cleaner for dirt. Clean the air filter of all dirt, etc. before operation.
3. Check to be sure that air intake screen is securely in place.
WARNING
Handle fuel with care. It is highly flammable. Fueling a hot engine or
an engine near an ignition source can cause fire and result in serious
personal injury and/or property damage.