USER MANUAL
Micro Reach Xtend
TM
(NN01-110)
Last updated on May 2020
© 2020 FRACTUS ANTENNAS, S.L. -
10
4.3.
ANTENNA FOOTPRINT
This antenna footprint applies for the reference evaluation board described on page 5 of this User
Manual. Feeding line dimensions over the clearance zone described in Figure 5 apply for a 0.8
mm thickness FR4 PCB.
Measure
mm
A
4.2
B
2.4
C
0.8
D
0.5
E
1.7
F
0.5
G
3.7
H
5.0
I
7.5
Tolerance
: ±0.2mm
Figure 5
–
Antenna Footprint Details.
Other PCB form factors and configurations may require a different feeding configuration, feeding
line dimensions and clearance areas. If you require support for the integration of the antenna in
your design, please contact
5.
ASSEMBLY PROCESS
shows the back and front view of the Micro Reach Xtend
TM
chip antenna, and indicates
the location of the feeding point and the mounting pads:
Figure 6
–
Pads of the Micro Reach Xtend
TM
chip antenna.
