Fractal MORPH 100, Руководство пользователя

Страница: 5 / 12

5
5. Subinterface
Setting
Option Description
Run Mode
DMX
Slave status: Receive DMX signals from the console or
Master
Sound
Auto run ;
Master status: Auto run and send DMX signal to slave
Random
Auto
DMX Address 001-512
Press “OK” key enter into edit status, then press “UP”
“DOWN” to change DMX address. press “OK” key save and
exit edit status.
Channel Mode Std.14CH Standard 14 Channel Mode
Top Lamp Temp 001-110
Sound Regulator -006 --- +006
Invert Pan
OFF
ON for starting and ending , the default is OFF.
ON
Invert Tilt
OFF
ON for starting and ending , the default is OFF.
ON
Pan-Tilt Swap
OFF
ON
Exchange Pan/Tilt channel (include Pan/Tilt Fine)
Pan-Tilt Encoder
ON
Use encoder (optocoupler) to determine out of step and
automatically correct position
OFF Correct position without encoder (optocoupler)
RDM
ON Support RDM function
OFF
No DMX Signal
KEEP Continue running as it is
CLEAR All motors return to the position and stop running.
Display
ON
OFF
Lamp On@Startup
OFF
ON
Load Default
Press the “OK” button to see the confirmation dialog,
press “OK” again
The key restores the default settings
Manual Control
This interface is used to control the current fixture and automatically enters the Master
state (does not receive the DMX signal and sends a DMX signal to the slave).