Fractal Audio MFC-101 MARK III Скачать руководство пользователя страница 65

Страница: 65 / 96

Fractal Audio Systems MFC-101 Manual

MIDI MENU REFERENCE

Doc v2.15

12.4.7

IA Switch Axe-Fx Functions

EDIT : MIDI : PAGE



(7x)

The

IA Switch Axe-Fx Functions

setting is used to assign Axe-Fx functions to each IA Switch. These settings are in effect to the

exclusion of all other MIDI Messages for the IA Switch whenever the MFC-101 is in AXE-FX MODE.

Use the



PARAMETER



footswitches to move between IA Switch Number and Axe-Fx Function parameters.

IA Switch numbers 18-41 are reserved for future use.

The list of functions which may be assigned appears in section

5.1.1

on p. 20 and is subject to the selected Axe-Fx Mode (p. 59).

NOTE:

As of firmware version 1.0, the MFC-101 only shows those Axe-Fx functions which are available on the model selected

in the MFC-101’s Axe-Fx Mode parameter.

* NOTE:

TUNER or TAP TEMPO can each be assigned to only ONE switch at a given time. If you try to assign a second switch to

one of these functions, the first will have its function changed automatically to “NONE”.

TUNER and TEMPO may also share a single footswitch. See

12.5.20

on p. 67.

12.4.8

IA Switch Control Change (CC#) Settings

EDIT : MIDI : PAGE



(8x)

IA Switch Control Change Settings

is used to specify the

Controller Number

and

MIDI Channel

for each of two available MIDI

Control Change (CC) commands (“c1” and “c2”) that an Instant Access Switch can send both ON and OFF messages for.

Use the



PARAMETER



footswitches to move between Instant Access Switch Number, Command Select, CC# Select, and

MIDI Channel parameters. Select an IA Switch, select a message to edit (c1 or c2) then set the CC# and Channel.

IA Switch numbers 18-41 are reserved for future use.

To disable either message, set its CC# to “OFF”.

INSTANT ACCESS SWITCH C1 CC# DEFAULT ASSIGNMENTS:

CC#

123

124

125

120

126

121

127

122

NOTE

: These settings for IA Switch CC# messages do not apply for IA Switches with Axe-Fx functions assigned (

12.4.7

) when the

MFC-101 is in AXE-FX MODE (

12.5.0

)

IA01 Axe-Fx FILTER1

IA01 c1 CC#102 Ch01

Содержание MFC-101 MARK III

































































































Результаты поиска

Содержание MFC-101 MARK III

Отзывы:

Похожие инструкции для MFC-101 MARK III

Бренды по названию

Популярные бренды

Fractal Audio MFC-101 MARK III, Руководство пользователя

Результаты поиска

Содержание MFC-101 MARK III

Отзывы:

Похожие инструкции для MFC-101 MARK III

Бренды по названию

Популярные бренды