Fractal Audio MFC-101 MARK III, Руководство пользователя

Страница: 34 / 96

INTERNAL CCs
Fractal Audio Systems MFC-101 Manual
It is not possible to display the Axe-Fx Tuner on the MFC-101 when Axe-Fx Mode (p. 10) is turned off, though a CC#
message can still turn the tuner on and off in the same way it would work on any other MIDI Foot Controller.
A special function allows the tap footswitch to launch the Axe-Fx TUNER when held. See section 12.5.20 .
5.2 General Use IA Switches
Instant Access Switches with their Axe-Fx functions set to “NONE” (or all IA switches when Axe-Fx mode is OFF)
offer a set of powerful general use MIDI commands. These General Use IA Switches can send the following types
of MIDI instructions when turned ON:

Up to 2 different MIDI Control Change messages with custom values (0–127).

Any one MIDI program change command on any channel.

Up to 16 bytes of freeform hexadecimal MIDI commands.
The OFF state can send:

The custom OFF values (0–127) for any CC#s sent by the ON action.

Any one MIDI program change command on any channel.

Another 16 bytes of freeform hexadecimal MIDI commands.

REMEMBER: When AXE-FX MODE is ON , IA Switches with Axe-Fx functions assigned will ONLY send the MIDI commands for
their Axe-Fx assignments. See section 5.1 , above.
The default assignments for the first Control Change message of each IA Switch are shown below. These are sent
with values of 127 for ON and 0 for OFF. All other IA switch settings are OFF by default.
Figure 5-2: Default Control Change Assignments for General Use IA Switches.
5.2.1 General Use IA Switch Control Change Messages
Each IA Switch may be assigned up to 2 Control Change message numbers, each of which sends an ON value when
the switch is turned ON, and an OFF value when the switch is turned OFF.