Fractal Audio MFC-101 MARK III Скачать руководство пользователя страница 31

Страница: 31 / 96

Fractal Audio Systems MFC-101 Manual

INTERNAL CCs

Doc v2.15

INSTANT ACCESS SWITCHES

Instant Access (IA) Switches are typically used like traditional stompbox switches to turn effects on or off. There
are many other creative possibilities for their use. The number of footswitches assigned to IA function is
determined by the global

Bank Size

(see section

4.1

on p. 15). Each numbered IA Switch (1-17) is always located at

the footswitch with the same number.

Instant Access Switches on the MFC-101 function as one of two types.

Axe-Fx IA Switches

have “native” Axe-Fx

functions assigned (ex: “DRIVE 1 BYPASS”). They perform no other functions except as designated.

General Use IA Switches

(those with their Axe-Fx functions set to NONE) send a range of general use MIDI

messages. The on/off states for IA switches of this type is stored per-preset in the MFC-101.

When Axe-Fx Mode (p. 10) is turned off, all IA Switches revert to their General Use settings.

All IA Switch settings are

global

—they stay the same across all presets, banks, songs, etc.

5.1

Axe-Fx IA Switches

In Axe-Fx mode, IA Switches can be set up to control many functions. Default settings are shown below:

Figure 5-1: Default IA Switch Assignments in Axe-Fx Mode.

You can freely change the above settings in the MIDI menu:

Press

EDIT

footswitch to enter EDIT MODE.

Press

MIDI

footswitch to select the MIDI menu.

Press

PAGE



footswitch 6x to get to the

IA Axe-Fx Functions

screen:

Press the

INCR

DECR

footswitch to select an IA Switch to edit by its number.

Press

PARAMETER



to move the cursor to the Axe-Fx Functions list.

IA01 Axe-Fx FILTER1

Содержание MFC-101 MARK III

































































































Результаты поиска

Содержание MFC-101 MARK III

Отзывы:

Похожие инструкции для MFC-101 MARK III

Бренды по названию

Популярные бренды

Fractal Audio MFC-101 MARK III, Руководство пользователя

Результаты поиска

Содержание MFC-101 MARK III

Отзывы:

Похожие инструкции для MFC-101 MARK III

Бренды по названию

Популярные бренды