Fracarro SIG7802HD, Быстрое руководство

Страница: 12 / 32

12
ENGLISH
IP Address:
192.168.1.168
Net Mask:
255.255.255.0
Default Gateway:
192.168.1.3
x . x . x . x
x . x . x . x
x . x . x . x
D. Setup IP
Enable DHCP:
DISABLE
DISABLE, ENABLE
Are you sure?
y
Are you sure?
n
When all the item in Setup IP are done, there will be a confirmation
on the display. Press UP or Down button to select y or n.
Select
y for YES, all the settings above will be stored in memory.
Select n for NO to cancel.
Before editing the IP Address, you need to select “DISABLE” in
“Enable DHCP”. Otherwise the IP setting will not complete.
i NOTE
E. Retrieve IP
◆ IP Address
◆
Net Address
◆
MAC Address
User can login SIG7802HD webpage by IP Address.
i NOTE
F. Set Language
Language:
English
NOTE
Only provide English in this version.
Are you sure?
y
Are you sure?
n
When the item setting in Set Language is done, there will be a confirmation
on the display. Press UP or Down button to select y or n.
Select y for YES, all the settings above will be stored in memory.
Select
n for NO to cancel.
Following the submenu flow charts enter the ‘Retrieve Status’ mode, you can check the parameters of
your previous settings in ‘System’
12
ENGLISHENGLISH
IP Address:
192.168.1.168
Net Mask:
255.255.255.0
Default Gateway:
192.168.1.3
x . x . x . x
x . x . x . x
x . x . x . x
D. Setup IP
Enable DHCP:
DISABLE
DISABLE, ENABLE
Are you sure?
y
Are you sure?
n
When all the item in Setup IP are done, there will be a confirmation
on the display. Press UP or Down button to select y or n.
Select
y for YES, all the settings above will be stored in memory.
Select n for NO to cancel.
Before editing the IP Address, you need to select “DISABLE” in
“Enable DHCP”. Otherwise the IP setting will not complete.
NOTE
E. Retrieve IP
◆ IP Address
◆
Net Address
◆
MAC Address
User can login SIG7802HD webpage by IP Address.
NOTE
F. Set Language
Language:
English
NOTE
Only provide English in this version.
Are you sure?
y
Are you sure?
n
When the item setting in Set Language is done, there will be a confirmation
on the display. Press UP or Down button to select y or n.
Select y for YES, all the settings above will be stored in memory.
Select
n for NO to cancel.
Following the submenu flow charts enter the ‘Retrieve Status’ mode, you can check the parameters of
your previous settings in ‘System’