Fracarro 283135, Быстрое руководство

Страница: 8 / 28

8
SAFETY WARNING
The product must only be installed by qualified persons, according to the local safety standards and regulations.
Fracarro Radioindustrie is free from all civil and criminal responsibilities due to breaches of the current legislation
derived from the improper use of the product by the installer, user or third parties. The product must be used in full
compliance with the instructions given in this manual in order to protect the operator against all possible injuries and
the product from being damaged. Never remove the lid of the product as there are live parts inside.
Earth screw symbol of the antenna
Class II symbol with a functional earth connection
Refer to the INSTALLER’S MANUAL that can be downloaded from the website
FRACARRO.IT on the product page to get more information about the TECHNICAL
SPECIFICATIONS.
Installation warnings
● The product must not be exposed to any dripping or splashing and thus it should be installed indoors and in a
dry location.
●
Humidity and condensation could damage the product. In case of condensation, wait until the product is dry
before using it.
● Handle the product carefully. Impacts can damage the product.
●
Leave enough space around the product to ensure sufficient ventilation.
● Excessive temperatures and/or an overheating may affect the performance and the life of the product.
●
Don’t install the product above or near any heat sources, in dusty places or where it might come into contact
with corrosive substances..
● In the event that the unit is fixed to the wall, use the proper screw anchors suitable to the characteristics of
the fixing support. The wall and the anchoring system must be able to support at least 4 times the weight of
the unit.
●
Warning: to avoid injury, this appliance must be secured to the wall / floor depending on the installation
instructions.
● For "PERMANENTLY INSTALLED APPLIANCES", an easily accessible cutting device must be added to the
exterior of the appliance; for "APPLIANCES WITH A POWER PLUG", the socket must be installed close to the
appliance and easily accessible.
●
The product must be connected to the grounding electrode of the antenna system in compliance with
standard EN 60728-11.
The screw provided for this purpose is marked with the symbol
● We recommend that you comply with the provisions of standard EN 60728-11 and do not connect this screw
to the Protective Earth of the electricity supply.
General warnings
In the event of a malfunctioning, do not try to fix the product as the guarantee would be invalidated.
Although the information given in this manual has been prepared carefully and thoughtfully, Fracarro
Radioindustrie S.r.l. reserves the right to modify it without notice and to improve and/or modify the product
described in this manual. See the website www.fracarro.com to have information relevant to the technical
support and product guarantee.