background image

14

1. SAFETY WARNING

The product should only be installed by qualified persons, according to the local safety standards and regulations. Fracarro 

Radioindustrie  is  free  from  all  civil  and  criminal  liabilities  due  to  any  breaches  of  the  current  legislation  derived  from  the 

improper use of the product by the installer, user or third parties.
The product must be used in full compliance with the instructions given in this manual in order to protect the operator from any 

possible injury and the product from being damaged.
Never remove the lid of the feeder as there are live parts inside.

INSTALLATION WARNING

•  The product must not be exposed to any dripping or splashing and thus it should be installed indoors and in a dry location.

•  Humidity and condensation could damage the product. In case of condensation, wait until the product is completely dry before 

using it.

•  Handle the product carefully. Any impact can damage the product.

•  Leave enough space around the product to ensure sufficient ventilation.

•  Excessive temperatures and/or an overheating may affect the performance and the life of the product.

•  Don’t install the product above or near any heat sources, in dusty areas or where it might come into contact with corrosive 

substances.

•  In the event that the unit is fixed to the wall, use the proper screw anchors suitable to the characteristics of the fixing support. 

The wall and the anchoring system must be able to support at least 4 times the weight of the unit.

•  ATTENTION: To avoid being hurt, the unit must be fixed to the wall in accordance with the installation instructions.

•  Use only the feeder supplied with the product.

•  The unit must be installed in a way that the main outlet is easy to reach.

•  The product must be connected to the earth electrode of the antenna system, in accordance with standard EN60728-11.

•  The screw arranged for this scope is marked by the symbol      

•  It is recommended to follow the provisions of the standard EN60728-11 and not to connect this screw to the protective ground 

of the supply mains.

GENERAL WARNING

In the event of a malfunction, do not try to fix the product as the guarantee would be invalidated.

Although the information given in this manual has been prepared carefully and thoughtfully, Fracarro Radioindustrie S.r.l. reser-

ves the right to modify it without notice and to improve and/or modify the product described in this manual. See the website 

www.fracarro.com to have information relevant to the technical support and product guarantee.

Содержание 271130

































Отзывы: