15
EN
G
L
IS
H
USE
PRELIMINARY CHECKS
Before starting the engine each time:
Check the level of technical fluids (fuel, engine oil and coolant),
and top-up if necessary.
Make sure that the air aspiration filter is not blocked or
obstructed, checking at the same time that the mechanical
indicator on the filter does not show the “red” sign. If the engine
is equipped with an electrical blockage sensor, an alarm will be
displayed on start-up, by means of the indicator light on the
instrument panel.
Note:
The procedures required to clean the filter are indicated
in the chapter CONTROLS AND MAINTENANCE.
STARTING AND STOPPING THE ENGINE
The start-up and shut-down operations described below apply to an
on-board control panel manufactured by IVECO MOTORS; if the
Manufacturer of the vehicle or machine has fitted a customised
instrument panel, these operations may vary according to the
various choices made during construction.
In these cases, follow the start-up/shut-down sequences and use the
instrument panel description provided in the specific
documentation.
CAUTION!
Make sure that no combustible vapours or gasses are
present in the area in which the engine is to operate.
Ensure that closed areas are adequately ventilated and
fitted with a suitable exhaust extraction system.
Содержание N45 MNA
Страница 1: ......