EXCEPTIONS:
1. Parts made of wood are not covered by the warranty.
2. Parts not manufactured by FPM Agromehanika AD Boljevac (tires, plastics, belts, cardan shafts,
cardan shields, hydraulic cylinders with connection hoses, etc.) are not covered by this warranty, but
by the manufacturer's warranty
3. Parts that are normally consumed in exploitation, such as: wedge belts, discs, cutting blades, tires,
scrapers, cutter blades, sliders underneath the cutting machine, protective guard.
4. This warranty is not valid in case of poor use, improper or negligent use or damage due to an
accident. The warranty ceases to be valid due to the use of non-original parts, and the factory is not
responsible for the damage resulting from the transport.
THE FACTORY IS NOT RESPONSIBLE FOR LOSS OF THE PROFIT DUE TO MALFUNCTION
OF THE MOWER OR THE FAILURE OF THIRD PARTIES, NOR FOR ADDITIONAL COSTS OF
WORK ON REMOVAL AND REPLACEMENT OF PARTS.
The buyer is responsible and bear the costs of the following:
1.
Normal maintenance, such as lubrication, oil retention, minor adjustments, and the like.
2.
Transport of the mower where the service is performed in the warranty period and return.
3. Time of travel of the authorized service to the owner of the mower and return, or delivery and return
of the mower from the workshop after the repair.
This warranty does not apply to the rear tractor mower which has been modified without our explicit
permission, or if it was performed by someone else, outside the authorized service.
The warranty is related to strict adherence to the warning:
- all the instructions in this manual must be respected and all shields are regularly reviewed and
replaced,
as needed.
No warranty is given for products that are not new.
The people who just work in our factory are not officially representatives of the factory and do not
have the right to assume any obligation on its behalf.
No warranty covers product equipment that is larger than that given, so the factory is not responsible
for any injuries caused by such use.
INTRODUCTION
The rear tractor mower FPM 627 089 belongs to the group of modern tools from our production
program and is intended for cutting all kinds of fodder plants. According to its construction, it is
located in the group of worn rear mowers and it has the possibility of aggregating to all tractors of I
and II category that have a three-point attachment system and a six-gang type output shaft, 34.9 mm in
