FPM Agromehanika 627 113C, Руководство пользователя и список запасных частей

Страница: 23 / 48

FPM AGROMEHANIKA | 23
7. PARKING AND STORING THE MOWER
7.1 Parking
To park the mower, do the following
- Lower the switch from the upper (D) transport position into the
leaning position;
- Using the tractor hydraulics lower the mower so that it leans
onto the ground;
- Transfer the cutter bar from the transport, vertical position into
the horizontal position.
- Lift the front part of the protective awning;
- Detach the mower from the tractor levers;
- Detach the machine hydraulic tube connector (F) from the
hydraulic plug on the tractor, and wrap the tube around the
mower frame.
- Detach the Cardan joint (T) from the tractor output shaft.
- Attach the chain (E) to the Cardan joint and mower frame, and
prevent the chain from unwrapping using the hook (C)
(see figure 54).
WARNING!
USE OIL OF THE REQUIRED QUALITY
IN ORDER TO AVOID DAMAGE TO THE MACHINE. BY
PROPER AND REGULAR OILING YOU WILL ENSURE
UNIMPEDED AND SAFE OPERATION.
WARNING!
ALWAYS PARK THE MOWER WITH THE
CUTTER BAR LOWERED INTO THE HORIZONTAL PO-
SITION.
7.2. Storing
If you do not intend to use the mower for an extended period, we recommend you do the following:
- Clean and wash the mower well in order to remove all plant residue and earth;
- Release the oil from the multiplier and cutter bar and fill them with clean oil in the appropriate manner;
- Replace all damaged and broken blades;
- Tighten all screws and nuts on the machine;
- Clean rusted surfaces and worn-out places and coat them with protective dyes;
- Keep the cutter bar in the working position.
- Remove the V-belts and keep them in a dry place;
- Lift the machine onto a wooden platform and place it under an awning or in an enclosed space in order
to protect it from the elements.
NOTE:
THE LISTED TIMES FOR OILING ONLY REFER TO NORMAL WORKING CONDITIONS. IF YOU ARE WORKING IN MORE DIFFICULT CONDI-
TIONS, MORE FREQUENT OILING IS NEEDED.